Qt 4.8 Cross Compile for Embedded Linux using Linaro Toolchain from Windows

[phil999]

I am trying to use the 2012.06 version of the Linaro Toolchain Windows Binary ( https://launchpad.net/linaro-toolchain-binaries/trunk/ ) to cross-compile the Qt 4.8 source to target an embedded Linux ARM Cortex-8 board. I was able to do this with the CodeSourcery toolchain mentioned in this post --> http://c2143.blogspot.com/?view=classic. But the target board software was built with the Linaro toolchain and so I am working towards that end.

I have patched the mkspec mentioned in the post above to look like this:

#
# qmake configuration for building with arm-none-linux-gnueabi-g++
#
include(../common/unix.conf)
include(../common/gcc-base-unix.conf)
include(../common/g++-unix.conf)
include(../common/qws.conf)

MAKEFILE_GENERATOR = MINGW
CONFIG += no_import_libs no_generated_target_info
# modifications to g++.conf
QMAKE_CC = arm-linux-gnueabihf-gcc
QMAKE_CXX = arm-linux-gnueabihf-g++
QMAKE_LINK = arm-linux-gnueabihf-g++
QMAKE_LINK_SHLIB = arm-linux-gnueabihf-g++
QMAKE_LIB = arm-linux-gnueabihf-ar
QMAKE_AR = arm-linux-gnueabihf-ar cqs
QMAKE_OBJCOPY = arm-linux-gnueabihf-objcopy
QMAKE_STRIP = arm-linux-gnueabihf-strip
QMAKE_RUN_CC = $(CC) -c $(CFLAGS) $(INCPATH) -o $obj $src
QMAKE_RUN_CC_IMP = $(CC) -c $(CFLAGS) $(INCPATH) -o $@ $<
QMAKE_RUN_CXX = $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $obj $src
QMAKE_RUN_CXX_IMP = $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $<
QMAKE_INCDIR =
QMAKE_INCDIR_QT = $$[QT_INSTALL_HEADERS]
QMAKE_LIBDIR_QT = $$[QT_INSTALL_LIBS]
QMAKE_MOC = $$[QT_INSTALL_BINS]\\moc.exe
QMAKE_UIC = $$[QT_INSTALL_BINS]\\uic.exe
QMAKE_IDC = $$[QT_INSTALL_BINS]\\idc.exe
QMAKE_COPY = copy /y
QMAKE_COPY_DIR = xcopy /s /q /y /i
QMAKE_MOVE = move
QMAKE_DEL_FILE = del
QMAKE_MKDIR = mkdir
QMAKE_DEL_DIR = rmdir
QMAKE_CHK_DIR_EXISTS = if not exist
QMAKE_IDL = midl
QMAKE_ZIP = zip -r -9
CODESOURCERY_ARM_CFLAGS = -march=armv7-a -mtune=cortex-a8 -mthumb -mfpu=vfp -mfloat-abi=softfp -Wa,-mimplicit-it=thumb -marm -mthumb-interwork
#modifications to gcc-base.conf
QMAKE_CFLAGS += $$CODESOURCERY_ARM_CFLAGS
QMAKE_CXXFLAGS += $$CODESOURCERY_ARM_CFLAGS
QMAKE_LIBS += -lrt -lpthread -ldl
QMAKE_LFLAGS += $${QMAKE_LFLAGS_RPATH}$$[QT_INSTALL_LIBS]
!isEmpty(TARGET_QTDIR) {
QMAKE_LFLAGS += $${QMAKE_LFLAGS_RPATH}$${TARGET_QTDIR}/lib
}
!isEmpty(TARGET_SYSROOT) {
QMAKE_LFLAGS += $${QMAKE_LFLAGS_RPATH}$${TARGET_SYSROOT}/lib:$${TARGET_SYSROOT}/usr/lib
QMAKE_LFLAGS += -Wl,--dynamic-linker=$${TARGET_SYSROOT}/lib/ld-linux.so.3
}
load(qt_config)

When I run mingw32-make on the top level Makefile in order to produce the Qt libraries for the ARM board it compiles for a while but inevitably errors with:

collect2.exe: error: ld returned 1 exit status
mingw32-make[1]: *** [..\..\lib\libQtCore.so] Error 1
mingw32-make[1]: Leaving directory `C:/Users/user/Desktop/qt_creator_toolchain...
mingw32-make: *** [sub-corelib-make_default-ordered] Error 2

This error happens after many complaints life:

*.so uses VFP register arguments, *obj does not

I've researched that error and have tried to pass each of the following options to my mkespec and rebuild with the same error:

-mfloat-abi=softfp
-mfloat-abi=soft
-mfloat-abi=hard

I am clearly not understanding why the '-mfloat-abi=softfp' option works fine with the CodeSourcery Windows toolchain but not Linaro. The rest of the compiler flags are shown in the mkspec above.

Does anybody have any insight or thoughts on how to make this work? Thanks in advance.

[phil999]

UPDATE:

It turns out if I modify my C_FLAGS in the mkspec from this:

-march=armv7-a -mtune=cortex-a8 -mthumb -mfpu=vfp -mfloat-abi=softfp -Wa,-mimplicit-it=thumb -marm -mthumb-interwork

to this:

-march=armv7-a -mtune=cortex-a8 -mthumb -mfpu=neon -mfloat-abi=hard -Wa,-mimplicit-it=thumb -marm -mthumb-interwork

Then I can finally successfully compile Qt. How will this affect my performance / or ability to run a Qt App on the Board? Why can't I do softfp with Linaro but I can with CodeSourcery?

[blueshift]

phil999,
I have been unsuccessful in rebuilding the configure.exe file as per mentioned in that post.
And did you used the same parameters for configure.exe as mentioned in that link?

Could you upload your configure.exe file somewhere so that I could use it without generating it...?

Have a nice day.

Regards,
blueshift