Unable to execute in Debug Mode
Hi...
So far i was executing my applications in the release mode... i.e by adding CONFIG += release.. So far it was okay but now i am not able to debug the application w/o the application running in debug mode...
Now when i try to execute the application in the debug mode i.e adding CONFIG += debug, i am not able to do so as it gives errors:
[HTML]
C:\MinGW\bin\..\lib\gcc\mingw32\3.4.2\..\..\..\..\ mingw32\bin\ld.exe: cannot find -lQtGuid4.
collect2: ld returned 1 exit status
[/HTML]
Please tell how to get the solution...
Thanking you...
Kapil
Re: Unable to execute in Debug Mode
Re: Unable to execute in Debug Mode
Quote:
Originally Posted by wysota
Hi..
I had gone through the FAQ earlier and i tried it now also.. both the options give the same error... It just runs fine when i use CONFIG += release..
rest all options it gives the error defined above...
Kapil
Re: Unable to execute in Debug Mode
But did you actually compile and install after running configure?
Re: Unable to execute in Debug Mode
Quote:
Originally Posted by wysota
But did you actually compile and install after running configure?
Was this question in regard to installation of QT on my system or the application that i created..
If installation then..
after i installed, i ran configure -debug and then make at the QT 4.1.1 Command Prompt...
which also gave many errors at the end... they were quite many and ranged out of the command prompt buffer... i am showing the last page of the errors.. first page went out of the range..
[HTML]
styles\qwindowsxpstyle.cpp:3331: error: `CS_ACTIVE' undeclared (first use this f
unction)
styles\qwindowsxpstyle.cpp:3333: error: `WP_CAPTION' undeclared (first use this
function)
styles\qwindowsxpstyle.cpp: In member function `virtual QPixmap QWindowsXPStyle:
:standardPixmap(QStyle::StandardPixmap, const QStyleOption*, const QWidget*) con
st':
styles\qwindowsxpstyle.cpp:3368: error: `WP_SMALLCLOSEBUTTON' undeclared (first
use this function)
styles\qwindowsxpstyle.cpp:3368: error: `CBS_NORMAL' undeclared (first use this
function)
styles\qwindowsxpstyle.cpp:3371: error: `TS_TRUE' undeclared (first use this fun
ction)
styles\qwindowsxpstyle.cpp:3371: error: `pGetThemePartSize' cannot be used as a
function
styles\qwindowsxpstyle.cpp:3364: warning: unused variable 'dwOpt'
styles\qwindowsxpstyle.cpp: In member function `QIcon QWindowsXPStyle::standardI
conImplementation(QStyle::StandardPixmap, const QStyleOption*, const QWidget*) c
onst':
styles\qwindowsxpstyle.cpp:3399: error: `WP_SMALLCLOSEBUTTON' undeclared (first
use this function)
styles\qwindowsxpstyle.cpp:3399: error: `CBS_NORMAL' undeclared (first use this
function)
styles\qwindowsxpstyle.cpp:3400: error: `WP_MAXBUTTON' undeclared (first use thi
s function)
styles\qwindowsxpstyle.cpp:3400: error: `MAXBS_NORMAL' undeclared (first use thi
s function)
styles\qwindowsxpstyle.cpp:3403: error: `TS_TRUE' undeclared (first use this fun
ction)
styles\qwindowsxpstyle.cpp:3403: error: `pGetThemePartSize' cannot be used as a
function
styles\qwindowsxpstyle.cpp:3411: error: `MAXBS_PUSHED' undeclared (first use thi
s function)
styles\qwindowsxpstyle.cpp:3415: error: `MAXBS_HOT' undeclared (first use this f
unction)
styles\qwindowsxpstyle.cpp:3419: error: `MAXBS_DISABLED' undeclared (first use t
his function)
styles\qwindowsxpstyle.cpp:3396: warning: unused variable 'dwOpt'
styles\qwindowsxpstyle.cpp:3439: error: `pGetThemePartSize' cannot be used as a
function
styles\qwindowsxpstyle.cpp:3443: error: `WP_CLOSEBUTTON' undeclared (first use t
his function)
styles\qwindowsxpstyle.cpp:3448: error: `CBS_PUSHED' undeclared (first use this
function)
styles\qwindowsxpstyle.cpp:3452: error: `CBS_HOT' undeclared (first use this fun
ction)
styles\qwindowsxpstyle.cpp:3456: error: `CBS_DISABLED' undeclared (first use thi
s function)
styles\qwindowsxpstyle.cpp:3433: warning: unused variable 'dwOpt'
styles\qwindowsxpstyle.cpp:3473: error: `WP_RESTOREBUTTON' undeclared (first use
this function)
styles\qwindowsxpstyle.cpp:3476: error: `pGetThemePartSize' cannot be used as a
function
styles\qwindowsxpstyle.cpp:3469: warning: unused variable 'dwOpt'
mingw32-make[2]: *** [tmp\obj\debug_shared\qwindowsxpstyle.o] Error 1
mingw32-make[2]: Leaving directory `C:/Qt/4.1.0/src/gui'
mingw32-make[1]: *** [debug] Error 2
mingw32-make[1]: Leaving directory `C:/Qt/4.1.0/src/gui'
mingw32-make: *** [debug-gui] Error 2
[/HTML]
else if the question was in regard to my application..
then in the .pro file i included the statement CONFIG += debug and then tried to run the command make but giving nothing than error...
The error which it gave i have mentioned earlier...
Thank you..
Kapil
Re: Unable to execute in Debug Mode
Re: Unable to execute in Debug Mode
So you didn't compile it :) Last page of errors is of no use. You can redirect the output from make to a file to keep all the messages.
Re: Unable to execute in Debug Mode
Hi...
The redirection of the make to a file kept everything but the errors and warnings :D
Compiling it?? :confused:
After configure + make, i need to compile it also.. now for that which command do i have to run..... :confused:
Will try that out :)
Thanks for the reply...
Kapil
Re: Unable to execute in Debug Mode
Make failed, so you didn't compile it. You have to redirect stderr to a file, not stdout, then you'll get your error messages. Alternatively press Ctrl+C when errors start to appear.
Re: Unable to execute in Debug Mode
Quote:
Originally Posted by wysota
Make failed, so you didn't compile it. You have to redirect stderr to a file, not stdout, then you'll get your error messages. Alternatively press Ctrl+C when errors start to appear.
Here are the set of errors which have come..
They arise from the file qwindowsxpstyle.cpp.. My OS is Widows 2000 prof... Are they 'coz of different OS...
I am pasting the first page of them..
[HTML]
styles\qwindowsxpstyle.cpp:67:21: uxtheme.h: No such file or directory
styles\qwindowsxpstyle.cpp:68:22: tmschema.h: No such file or directory
styles\qwindowsxpstyle.cpp:168: warning: `__stdcall__' attribute only applies to function types
styles\qwindowsxpstyle.cpp:168: error: typedef `PtrGetThemePartSize' is initialized (use __typeof__ instead)
styles\qwindowsxpstyle.cpp:168: error: `HTHEME' was not declared in this scope
styles\qwindowsxpstyle.cpp:168: error: expected primary-expression before "hdc"
styles\qwindowsxpstyle.cpp:168: error: expected primary-expression before "int"
styles\qwindowsxpstyle.cpp:168: error: expected primary-expression before "int"
styles\qwindowsxpstyle.cpp:168: error: expected primary-expression before '*' token
styles\qwindowsxpstyle.cpp:168: error: `prc' was not declared in this scope
styles\qwindowsxpstyle.cpp:168: error: expected primary-expression before "enum"
styles\qwindowsxpstyle.cpp:168: error: expected primary-expression before '*' token
styles\qwindowsxpstyle.cpp:168: error: `psz' was not declared in this scope
styles\qwindowsxpstyle.cpp:169: error: ISO C++ forbids declaration of `HTHEME' with no type
styles\qwindowsxpstyle.cpp:169: error: typedef `HTHEME' is initialized (use __typeof__ instead)
styles\qwindowsxpstyle.cpp:169: error: expected primary-expression before "__attribute__"
styles\qwindowsxpstyle.cpp:169: error: expected `,' or `;' before '(' token
styles\qwindowsxpstyle.cpp:181: error: `INTLIST' has not been declared
styles\qwindowsxpstyle.cpp:181: error: ISO C++ forbids declaration of `pIntList' with no type
styles\qwindowsxpstyle.cpp:182: error: `MARGINS' has not been declared
styles\qwindowsxpstyle.cpp:182: error: ISO C++ forbids declaration of `pMargins' with no type
styles\qwindowsxpstyle.cpp:184: error: use of enum `THEMESIZE' without previous declaration
styles\qwindowsxpstyle.cpp:184: error: ISO C++ forbids declaration of `eSize' with no type
styles\qwindowsxpstyle.cpp:184: error: conflicting declaration 'typedef LONG (*PtrGetThemePartSize)(HTHEME, struct HDC__*, int, int, struct RECT*, int, struct SIZE*)'
styles\qwindowsxpstyle.cpp:168: error: 'PtrGetThemePartSize' has a previous declaration as `typedef LONG*PtrGetThemePartSize'
styles\qwindowsxpstyle.cpp:184: error: declaration of `typedef LONG (*PtrGetThemePartSize)(HTHEME, struct HDC__*, int, int, struct RECT*, int, struct SIZE*)'
styles\qwindowsxpstyle.cpp:168: error: conflicts with previous declaration `typedef LONG*PtrGetThemePartSize'
styles\qwindowsxpstyle.cpp:184: error: declaration of `typedef LONG (*PtrGetThemePartSize)(HTHEME, struct HDC__*, int, int, struct RECT*, int, struct SIZE*)'
styles\qwindowsxpstyle.cpp:168: error: conflicts with previous declaration `typedef LONG*PtrGetThemePartSize'
styles\qwindowsxpstyle.cpp:186: error: use of enum `PROPERTYORIGIN' without previous declaration
styles\qwindowsxpstyle.cpp:186: error: ISO C++ forbids declaration of `pOrigin' with no type
styles\qwindowsxpstyle.cpp:193: error: `PtrOpenThemeData' does not name a type
styles\qwindowsxpstyle.cpp: In member function `HTHEME XPThemeData::handle()':
styles\qwindowsxpstyle.cpp:399: error: `pOpenThemeData' undeclared (first use this function)
styles\qwindowsxpstyle.cpp:399: error: (Each undeclared identifier is reported only once for each function it appears in.)
styles\qwindowsxpstyle.cpp: In member function `const QPixmap* QWindowsXPStylePrivate::tabBody(QWidget*)':
styles\qwindowsxpstyle.cpp:545: error: `TABP_BODY' undeclared (first use this function)
styles\qwindowsxpstyle.cpp:546: error: `TS_TRUE' undeclared (first use this function)
styles\qwindowsxpstyle.cpp:546: error: `pGetThemePartSize' cannot be used as a function
styles\qwindowsxpstyle.cpp: In static member function `static bool QWindowsXPStylePrivate::resolveSymbols()':
styles\qwindowsxpstyle.cpp:575: error: `pOpenThemeData' undeclared (first use this function)
styles\qwindowsxpstyle.cpp:575: error: `PtrOpenThemeData' undeclared (first use this function)
[/HTML]
ALso there were set of warnings at the starting... Here they are..
[HTML]
..\..\corelib\io\qfsfileengine.cpp:130: warning: 'QByteArray openModeToFopenMode(QFlags<QIODevice::OpenModeFlag >, const QString&)' defined but not used
..\..\corelib\io\qfsfileengine.cpp:130: warning: 'QByteArray openModeToFopenMode(QFlags<QIODevice::OpenModeFlag >, const QString&)' defined but not used
..\..\corelib\io\qfsfileengine.cpp:130: warning: 'QByteArray openModeToFopenMode(QFlags<QIODevice::OpenModeFlag >, const QString&)' defined but not used
io\qfsfileengine.cpp:130: warning: 'QByteArray openModeToFopenMode(QFlags<QIODevice::OpenModeFlag >, const QString&)' defined but not used
kernel\qeventdispatcher_win.cpp: In destructor `virtual QEventDispatcherWin32Private::~QEventDispatcherWin 32Private()':
kernel\qeventdispatcher_win.cpp:156: warning: cast from pointer to integer of different size
kernel\qeventdispatcher_win.cpp: In function `HWND__* qt_create_internal_window(const QEventDispatcherWin32*)':
kernel\qeventdispatcher_win.cpp:322: warning: cast from pointer to integer of different size
kernel\qeventdispatcher_win.cpp:780:2: warning: no newline at end of file
Creating library file: C:\Qt\4.1.1\lib\libQtCored4.a
Creating library file: C:\Qt\4.1.1\lib\libQtXmld4.a
kernel\qapplication_win.cpp: In member function `bool QETWidget::translateTabletEvent(const MSG&, PACKET*, int)':
kernel\qapplication_win.cpp:3303: warning: passing `qreal' for converting 1 of `QPoint::QPoint(int, int)'
kernel\qapplication_win.cpp:3303: warning: passing `qreal' for converting 2 of `QPoint::QPoint(int, int)'
In file included from C:/Qt/4.1.1/include/QtGui/private/qprintengine_win_p.h:1,
from painting\qprinter.cpp:34:
C:/Qt/4.1.1/include/QtGui/private/../../../src/gui/painting/qprintengine_win_p.h: In constructor `QWin32PrintEnginePrivate::QWin32PrintEnginePrivat e()':
C:/Qt/4.1.1/include/QtGui/private/../../../src/gui/painting/qprintengine_win_p.h:180: warning: `QWin32PrintEnginePrivate::hdc' will be initialized after
C:/Qt/4.1.1/include/QtGui/private/../../../src/gui/painting/qprintengine_win_p.h:177: warning: `void*QWin32PrintEnginePrivate::pInfo'
[/HTML]
As u said that make failed 'coz i had not compiled... But if this is the case then why does make execute my application whenever i include the line CONFIG += release in my .pro file... :confused:
Re: Unable to execute in Debug Mode
Did you upgrade MinGW's win API libraries as Christian told you?
Re: Unable to execute in Debug Mode
Quote:
Originally Posted by jacek
Did you upgrade MinGW's win API libraries as Christian told you?
Yes, I did that.. i extracted the include and lib headers and replaced them with the existing MinGW files...
Re: Unable to execute in Debug Mode
Then try compiling Qt without windows xp style (configure -no-style-windowsxp).
Re: Unable to execute in Debug Mode
Quote:
Originally Posted by jacek
Then try compiling Qt without windows xp style (configure -no-style-windowsxp).
did that too.. still am not able to make in debug mode..
Re: Unable to execute in Debug Mode
Quote:
Originally Posted by Kapil
did that too.. still am not able to make in debug mode..
And you are still getting error messages regarding qwindowsxpstyle.cpp file? Does the Qt version you have support your OS?
Re: Unable to execute in Debug Mode
And try running "make sub-src" instead of pure "make", this should only compile the libraries you need (provided that you already have the release mode files). Of course it's all in addition to what's already been said (make clean could also help if you still get errors on the windowsxp style, which you won't be able to use on Windows2000 anyway).
Re: Unable to execute in Debug Mode
Quote:
Originally Posted by jacek
And you are still getting error messages regarding qwindowsxpstyle.cpp file? Does the Qt version you have support your OS?
The QT version supports my OS.. its Windows2000 pro.
I am able to create applications and the execute them in the release mode.. but that does not create my build in debug mode...
so if there are errors then i am not able to debug them..
This is the error when i try to run "make" for my application in debug mode..
[HTML]
C:\MinGW\bin\..\lib\gcc\mingw32\3.4.2\..\..\..\..\ mingw32\bin\ld.exe: cannot find -lQtGuid4
[/HTML]
Kapil
Re: Unable to execute in Debug Mode
Seems like Kapil won't understand us...
Did you build Qt witout errors with configure.exe -no-style-windowsxp and is qt4-dir/lib/qtguid4.dll available? If the dll is not avialable, than you did not build Qt correct and therefore linking your app in debug mode will not work... :mad:
Re: Unable to execute in Debug Mode
Quote:
Originally Posted by ChristianEhrlicher
Did you build Qt witout errors with configure.exe -no-style-windowsxp
yes i did build it same as it was suggested i.e. i ran the command configure.exe -no-style-windowsxp..
Quote:
is qt4-dir/lib/qtguid4.dll available?
yes, it is there in my qt4-dir/lib/qtguid4.dll...
Now what next ?? I have done exactly the way it has been suggested in the above posts..
I hope this makes u feel i have understood something somewhere :)
Thanks for the reply... :)
Kapil
Re: Unable to execute in Debug Mode
Ok, then please rerun qmake (the one in qt4-dir/bin) and if it won't link either, take a look if qt4-dir/lib is in the link-command (or post the complete link command and not only the error message). Maybe you use another qmake.exe which points to the wrong qt4/lib - directory...