(Another) segmentation fault

Hello.

I've started using QT recently and I quite like it so far. However I can't get past this error.

In Povezava.ui.h I have setup connection to database like this:

Code:

---

void Povezava::Connect_clicked()
{  
    int indeks = tipbaze->currentItem();
    if (indeks==0) {driver ="QMYSQL3";}
    if (indeks==1) {driver ="QPSQL7";}
    if (indeks==2) {driver ="QODBC3";}
 
    QSqlDatabase *baza = QSqlDatabase::addDatabase ( driver );
    baza->setHostName ( hostm );
    baza->setDatabaseName ( namem );
    baza->setUserName ( userm );
    baza->setPassword ( passm );
 
    bool ok = baza->open();
}

---

This part definitelly works as I've tested it in many ways.

In another form I'm checking if the connection is properly opened with this code:

Code:

---

void GlavnoO :: pushButton3_clicked()
{
    bool ok = FALSE;
    ok = povezava.baza->isOpen();
}

---

I don't get any errors when compiling. But whet I click on this button I get segmentation fault EVERY time! I've tried it with connection opened and closed. I also did 'make clean' just in case. Nothing worked.

I have no idea how to get past this.

Its ok becouse you declare baza variable in method Connect_clicked(). After returning from this method you havent access to this variable. For solving you need declare baza as class member

I already have baza declared as class member in povezava.ui.h

It's under povezava.ui.h->members->class variables->public-> QSqlDatabase *baza ;

So why you redeclare it in

Code:

---

QSqlDatabase *baza = QSqlDatabase::addDatabase ( driver );

---

Right code

Code:

---

baza = QSqlDatabase::addDatabase ( driver )

---

Tried that but still getting segmentation fault in the same way :(

Compile your application in debug mode and run it from a debugger. When it crashes, print the stack trace and post it here.

I've added "CONFIG += debug" into my project file but the output when my application crashes still says only "Segmentation fault".

This is debug from 'make':

Quote:

---

[root@simon dbconn]# make --debug
GNU Make 3.80
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Reading makefiles...
Updating goal targets....
File `first' does not exist.
File `all' does not exist.
Prerequisite `povezava.ui.h' is newer than target `.ui/povezava.cpp'.
Must remake target `.ui/povezava.cpp'.
/usr/lib/qt-3.3/bin/uic povezava.ui -i povezava.h -o .ui/povezava.cpp
Successfully remade target file `.ui/povezava.cpp'.
Prerequisite `.ui/povezava.cpp' is newer than target `.obj/povezava.o'.
Prerequisite `povezava.ui.h' is newer than target `.obj/povezava.o'.
Must remake target `.obj/povezava.o'.
g++ -c -pipe -Wall -W -g -DQT_SHARED -DQT_NO_DEBUG -DQT_THREAD_SUPPORT -I/usr/lib/qt-3.3/mkspecs/default -I. -I/usr/lib/qt-3.3/include -I.ui/ -I. -I.moc/ -o .obj/povezava.o .ui/povezava.cpp
/usr/lib/qt-3.3/include/qsqldatabase.h:63: warning: ‘class QSqlDriverCreatorBase’ has virtual functions but non-virtual destructor
/usr/lib/qt-3.3/include/qtooltip.h:86: warning: ‘class QToolTip’ has virtual functions but non-virtual destructor
Successfully remade target file `.obj/povezava.o'.
Prerequisite `.obj/povezava.o' is newer than target `povezava'.
Must remake target `povezava'.
g++ -o povezava .obj/main.o .obj/glavnoo.o .obj/povezava.o .obj/moc_glavnoo.o .obj/moc_povezava.o -L/usr/lib/qt-3.3/lib -L/usr/X11R6/lib -lqt-mt -lXext -lX11 -lm
Successfully remade target file `povezava'.
Must remake target `all'.
Successfully remade target file `all'.
Must remake target `first'.
Successfully remade target file `first'.
[root@simon dbconn]# ./povezava
Segmentation fault

---

Just a way to "debug", check everytime before accesing to baza pointer if its null and show a message on screen or on the standard output, for example, in this case.

Try this:

$ gdb ./povezava
(gdb) run
(some output will go there and eventually the application will segfault)
(gdb) bt


and show us the result of "bt".

Here is what I get with gdb:

Quote:

---

(gdb) run
Starting program: /home/simon/projects/dbconn/povezava
Reading symbols from shared object read from target memory...done.
Loaded system supplied DSO at 0xb9e000
[Thread debugging using libthread_db enabled]
[New Thread -1208837664 (LWP 9818)]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1208837664 (LWP 9818)]
0x04d45bb5 in QSqlDatabase::isOpen (this=0xffff) at sql/qsqldatabase.cpp:772
772 return d->driver->isOpen();
(gdb) bt
#0 0x04d45bb5 in QSqlDatabase::isOpen (this=0xffff) at sql/qsqldatabase.cpp:772
#1 0x0804bcb0 in GlavnoO::test_clicked (this=0xbff491fc) at .ui/../glavnoo.ui.h:28
#2 0x0804e877 in GlavnoO::qt_invoke (this=0xbff491fc, _id=52, _o=0xbff48af8) at .moc/moc_glavnoo.cpp:87
#3 0x04ab9eb4 in QObject::activate_signal (this=0x9967440, clist=0x9969488, o=0xbff48af8) at kernel/qobject.cpp:2355
#4 0x04aba374 in QObject::activate_signal (this=0x9967440, signal=4) at kernel/qobject.cpp:2324
#5 0x04e39c7e in QButton::clicked (this=0xffff) at .moc/release-shared-mt/moc_qbutton.cpp:152
#6 0x04b59a63 in QButton::mouseReleaseEvent (this=0x9967440, e=0xbff48e54) at widgets/qbutton.cpp:836
#7 0x04af8187 in QWidget::event (this=0x9967440, e=0xbff48e54) at kernel/qwidget.cpp:4699
#8 0x04a550dd in QApplication::internalNotify (this=0xffff, receiver=0x9967440, e=0xbff48e54) at kernel/qapplication.cpp:2635
#9 0x04a5603f in QApplication::notify (this=0xbff49334, receiver=0x9967440, e=0xbff48e54) at kernel/qapplication.cpp:2421
#10 0x049ec746 in QETWidget::translateMouseEvent (this=0x9967440, event=0xbff49118) at kernel/qapplication.h:518
#11 0x049eaf01 in QApplication::x11ProcessEvent (this=0xbff49334, event=0xbff49118) at kernel/qapplication_x11.cpp:3468
#12 0x049ff008 in QEventLoop::processEvents (this=0x9944fe0, flags=Variable "flags" is not available.
) at kernel/qeventloop_x11.cpp:192
#13 0x04a6d82b in QEventLoop::enterLoop (this=0x9944fe0) at kernel/qeventloop.cpp:198
#14 0x04a6d736 in QEventLoop::exec (this=0x9944fe0) at kernel/qeventloop.cpp:145
#15 0x04a54aa9 in QApplication::exec (this=0xbff49334) at kernel/qapplication.cpp:2758
#16 0x0804bc31 in main (argc=1, argv=0xbff49414) at main.cpp:19
(gdb) Quit
(gdb)

---

Can we see the current code too?

Code is still the same as it was in the first post.

Then this code is surely invalid as you have a local variable "baza" which points to the database and a member variable "baza" which points to some garbage which probably causes a crash.

Possible. But why doesn't compiler find any errors? And how do i change the code to make it work?

Why should it find errors? The code is valid C++, it just doesn't do what you wnt. Zlatko already told you how to correct it.

You mean this post?

Quote:

---

Originally Posted by zlatko

So why you redeclare it in

Code:

---

QSqlDatabase *baza = QSqlDatabase::addDatabase ( driver );

---

Right code

Code:

---

baza = QSqlDatabase::addDatabase ( driver )

---

---

I tried that but I'm still getting segmentation fault.

But the code is different. Run it under debugger again. And please paste the contents of test_clicked() slot.

Hmm, I think I figured out my problem with help from all of you. I need to properly specify 'QSqlDatabase *baza; ' as a global variable. Now the n00b question: how do I do that, please? Tried to do it in my main.cpp but it doesn't work.

No, you don't have to do that. First of all QSqlDatabase::addDatabase() returns an object and not a pointer. And second of all you can access the database later on by calling QSqlDatabase::database(). You don't need a variable to hold that handler. Please read the reference of QSqlDatabase. It's explained there (on the very beginning of the detailed description).

Following that example I changed

Code:

---

1.
      void GlavnoO :: pushButton3_clicked()
      {
          bool ok = FALSE;
          ok = povezava.baza->isOpen();
      }

---

to

Code:

---

void GlavnoO::pushButton3_clicked()
{
    bool ok = FALSE;
    QSqlDatabase *baza = QSqlDatabase::database();
    ok = baza->isOpen();
}

---

It compiles normally but it crashes with segmentation fault again when I press that button.

And I have to use pointers cause I have this in my Qt Assistant QSqlDatabase Reference:

Quote:

---

Static Public Members
QSqlDatabase * addDatabase ( const QString & type, const QString & connectionName = defaultConnection )
QSqlDatabase * addDatabase ( QSqlDriver * driver, const QString & connectionName = defaultConnection )
QSqlDatabase * database ( const QString & connectionName = defaultConnection, bool open = TRUE )
void removeDatabase ( const QString & connectionName )
void removeDatabase ( QSqlDatabase * db )
bool contains ( const QString & connectionName = defaultConnection )
QStringList drivers ()
void registerSqlDriver ( const QString & name, const QSqlDriverCreatorBase * creator )
bool isDriverAvailable ( const QString & name )

---

Notice also the sentence in docs:

Quote:

---

If connectionName does not exist in the list of databases, 0 is returned.

---

So add a check for null pointer:

Code:

---

void GlavnoO::pushButton3_clicked()
{
	bool ok = FALSE;
	QSqlDatabase *baza = QSqlDatabase::database();
	if (baza)
	{
		ok = baza->isOpen();
	}
}

---

Yep, that solves the segmentation fault. But I would still like to know how to acces databse connection which I opened in another form.

Quote:

---

Originally Posted by Lebowski

And I have to use pointers

---

Sure, you're using Qt3 and I was looking at Qt4 docs.

Quote:

---

But I would still like to know how to acces databse connection which I opened in another form.

---

First check if addDatabase returns a valid database handle.

I did check with this code in form povezava (povezava.ui.h):

Code:

---

bool ok = baza->open();
    if (!ok) {QMessageBox::warning (this, "Pozor!!!!!!!!!!!", "not working",1,0,0);}
	else  {
	QMessageBox::information ( this, "Uspeh!!!!!!!!!", "working",1,0,0 );
	close();
    };

---

And it certainly works.

But now I need to access it from a different form, from file glavnoo.ui.h.

So why don't you use QSqlDatabase::database()?

I am using that.

Code:

---

void GlavnoO::test_clicked()
{
    bool ok = FALSE;
    QSqlDatabase *baza = QSqlDatabase::database();
    if (baza) {
	ok = baza->isOpen();
    };

---

Originally it was without 'if (baza) ...' statement.

So what's wrong with that? The form you use it in doesn't matter. You can use QSqlDatabase::database() from anywhere. Just makesure addDatabase() has been invoked earlier.

Yep, it does work now!! Thanx all. :)

Seems I was missing QSqlDatabase::database() statement so my 'baza' pointer had a random value.