Results 1 to 2 of 2

Thread: Downloading the 2440test program via USB

  1. #1

    Default Downloading the 2440test program via USB

    With the Download & Run function of Supervivi, we can download the 2440test program‟‟ via USB without the use of parallel port or JTAG board. Take the following steps:
    1. Connect the power source, serial port line, USB Cable to the board, set the S2 to the Nor Flash, run the Hyper-terminal and DNW program. Power up the board.
    2. Check the connections. As shown in the picture below, [USB: OK] means that USB driver has been installed and USB is connected, [COM: x] means that the serial port is not connected.


    Connect the JTAG board to the JTAG interface on the MINI2440 board, and the serial port line to the serial port. Power-up the board, open the H-JTAG program:Copy the directory 2440test in the program codein the CD to another directory in the hard‟‟‟‟ disk (D:\work in this example), remove the read-only attribute. Then run the ADS1.2 program, click File->Open... and open the file 2440test.mcp,
    Click the menu Project->Debug or Press the F5 key to start compiling the 2440test project.‟‟ After compiling the AXD Debugger automatically runs and downloads the 2440test.axf image to the memory via JTAG interface

  2. #2

    Default Re: Downloading the 2440test program via USB

    mini2440v2 with 3.5'',embedded board,SBC
    www.developmentboard.net

Similar Threads

  1. Downloading files
    By MTK358 in forum Newbie
    Replies: 3
    Last Post: 23rd June 2010, 01:08
  2. Replies: 1
    Last Post: 17th April 2010, 01:12
  3. Downloading a video from youtube
    By Faster in forum Qt Programming
    Replies: 21
    Last Post: 28th November 2009, 13:46
  4. Problem with downloading a webpage
    By Fenix Voltres in forum Newbie
    Replies: 2
    Last Post: 25th June 2009, 20:55
  5. Downloading from a clean url
    By travlr in forum Qt Programming
    Replies: 1
    Last Post: 21st June 2007, 22:55

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Digia, Qt and their respective logos are trademarks of Digia Plc in Finland and/or other countries worldwide.