hello everyone and happy new year.
i am not sure how to tackle this problem or where is originates from so i am writing here in hope that if you can not help you can at least point me in a direction.
I am writing some little program using only standard c++ library and i am opening a file that contains strings. there are numbers , english and greek letters among the characters. the reading is done fine and the data are then stored onto a buffer (without undergoing any processing) as a few int values ( the lengths of the strings), followed by a long c string - the concatenation of all the strings of the file.
the receive application can then use the lengths of the strings to separate the strings from the string again.
so examining the buffer contents in the shared memory i found that the numbers have their correct corresponding values (0x30 for char '0' etcetc.) and the lengths of the strings in the c string are correct too. but the greek characters and system chars found among them (like spacebar) where wrong - did not have their expected (extended) ascii values. the funny thing is if i printf the strings of the file, they appear correctly on console!!
i have set LC_ALL environment variable in my linux machine to en_US.UTF-8, just in case this is an important detail. and the file was written from vim (not internally from the program). is it possible that the file is written in utf-16 format? utf-8? could it be something wrong in the code?(see below)
thank you in advance for your help
CODE:
once i have the independent strings with 'loadInfoConf()' i serialise them and send them to the shMem using:
string detailsStr; details.writeStructToStream(GUILastMessage.oNL,GUILastMessage.oTL,GUILastMessage.sNL,GUILastMessage.sLL,
GUILastMessage.iDL,GUILastMessage.mDL,detailsStr);
strcpy(&GUILastMessage.oAndS_str,detailsStr.c_str());
string detailsStr; details.writeStructToStream(GUILastMessage.oNL,GUILastMessage.oTL,GUILastMessage.sNL,GUILastMessage.sLL,
GUILastMessage.iDL,GUILastMessage.mDL,detailsStr);
strcpy(&GUILastMessage.oAndS_str,detailsStr.c_str());
To copy to clipboard, switch view to plain text mode
---------------------------------------------------------------
void InfoClass::loadInfoConf()
{
string curLine="",sumLine="", lines[6];
int i=0;
ifstream infoConfFile(INFOCONF_FILENAME);
if (infoConfFile.is_open())
{
while (!infoConfFile.eof())
{
getline(infoConfFile,curLine);
if ((curLine!="EOV"))
{
if (curLine!="")
sumLine=sumLine+curLine+"\n";
}
else
{
lines[i]=sumLine;
sumLine="";
i++;
}
}
infoConfFile.close();
//remove the last char which is always \n due to the way
//the file open parser (just above) works
lines[0].erase( (lines[0].length()-1) ,1);
lines[1].erase( (lines[1].length()-1) ,1);
lines[2].erase( (lines[2].length()-1) ,1);
lines[3].erase( (lines[3].length()-1) ,1);
lines[4].erase( (lines[4].length()-1) ,1);
lines[5].erase( (lines[5].length()-1) ,1);
info.operatorTel = lines[0];
info.operatorName = lines[1];
info.stationNum = lines[2];
info.stationLoc = lines[3];
info.instDate = lines[4];
info.maintDate = lines[5];
}
else
cout<<"could not open info file\n";
}
void InfoClass::loadInfoConf()
{
string curLine="",sumLine="", lines[6];
int i=0;
ifstream infoConfFile(INFOCONF_FILENAME);
if (infoConfFile.is_open())
{
while (!infoConfFile.eof())
{
getline(infoConfFile,curLine);
if ((curLine!="EOV"))
{
if (curLine!="")
sumLine=sumLine+curLine+"\n";
}
else
{
lines[i]=sumLine;
sumLine="";
i++;
}
}
infoConfFile.close();
//remove the last char which is always \n due to the way
//the file open parser (just above) works
lines[0].erase( (lines[0].length()-1) ,1);
lines[1].erase( (lines[1].length()-1) ,1);
lines[2].erase( (lines[2].length()-1) ,1);
lines[3].erase( (lines[3].length()-1) ,1);
lines[4].erase( (lines[4].length()-1) ,1);
lines[5].erase( (lines[5].length()-1) ,1);
info.operatorTel = lines[0];
info.operatorName = lines[1];
info.stationNum = lines[2];
info.stationLoc = lines[3];
info.instDate = lines[4];
info.maintDate = lines[5];
}
else
cout<<"could not open info file\n";
}
To copy to clipboard, switch view to plain text mode
------------------------------------------------------------------------------------
void InfoClass::writeStructToStream (int &on_len, int &ot_len, int &sn_len, int &sl_len,
int &id_len, int &md_len, string &buffer)
{
on_len=info.operatorName.length();
ot_len=info.operatorTel.length();
sn_len=info.stationNum.length();
sl_len=info.stationLoc.length();
id_len=info.instDate.length();
md_len=info.maintDate.length();
//int totLen=on_len+ot_len+sn_len+sl_len+id_len+md_len/*+1*/;
string tmpbuf="";
tmpbuf += info.operatorTel;
tmpbuf += info.operatorName;
tmpbuf += info.stationNum;
tmpbuf += info.stationLoc;
tmpbuf += info.instDate;
tmpbuf += info.maintDate;
buffer=tmpbuf;
}
void InfoClass::writeStructToStream (int &on_len, int &ot_len, int &sn_len, int &sl_len,
int &id_len, int &md_len, string &buffer)
{
on_len=info.operatorName.length();
ot_len=info.operatorTel.length();
sn_len=info.stationNum.length();
sl_len=info.stationLoc.length();
id_len=info.instDate.length();
md_len=info.maintDate.length();
//int totLen=on_len+ot_len+sn_len+sl_len+id_len+md_len/*+1*/;
string tmpbuf="";
tmpbuf += info.operatorTel;
tmpbuf += info.operatorName;
tmpbuf += info.stationNum;
tmpbuf += info.stationLoc;
tmpbuf += info.instDate;
tmpbuf += info.maintDate;
buffer=tmpbuf;
}
To copy to clipboard, switch view to plain text mode
-------------------------------------------------------------------------
problem with storing greek chars to a buffer (os linux)
Reply With Quote
Bookmarks